12ton 18ton 24ton Heavy Excavator Attachments Steel Scrap Grabber Hydraulic Orange Peel Grapple

Orange Peel Grapple Features

1). Unlimited clockwise and anti-clockwise 360° rotatable swing bearing system;
2). More powerful and stable.
3). Using steel and all pins are heat treated making our grapple with a very long service life.
4). High quality oil seals, balance valve, safety valve making cylinder more durable and safe.
5). Using handles to operate the grapple which is more comfortable and flexible for driver.

Orange Peel Grapple Component:
1, Hydraulic Control System
2, Hydraulic Power System
3, Riveting Welding Strcuture

12ton 18ton 24ton Heavy Excavator Attachments Steel Scrap Grabber Hydraulic Orange Peel Grapple

Our Orange Peel Grapple Product Parameter

Hydraulic rotary steel grab product maintenance:
1. Daily checkpoints
Whether there is any damage or deformation of the body, whether there is leakage of the hose interface, damage to the pin and bushing and its replacement cycle, check the loosening state of bolts and nuts, check the oil level and loosing of the gear, tighten the bolt.
2. Regular checkpoints
The seals and rotating parts of the hydraulic cylinder will wear out, and should be replaced in time after reaching the service life. Replacement parts should be matched with the original factory.
Check the rotation shaft, the rotation shaft unlimited rotation 360 degrees, convenient from any Angle accurate work, check the rotation shaft has enough lubricant, bolts are tight enough.
3. Check the tightening state of bolts and install new bolts. Check after 8 hours of use, and ensure that the bolts tightened are not loose. The damaged bolts should be replaced in time. It should be replaced after about 1500 hours or 12 months of use after installation.
4. It is recommended to regularly check whether there is oil leakage to ensure that there is no fault and the product can run smoothly.
Every 4 hours: fill lubriCATEEEEing oil, lubriCATEEEEe shaft pin and rotating gear once. Every six months or 1000 hours (whichever comes first): replace the hydraulic cylinder oil seal and motor oil seal once.

Quality Assurance
Main structure12:Free maintenance within 12 months, cracking of steel plate, replacement of cracked parts; Welding bead cracking customers need to weld by themselves, unable to weld, the company welding for free, do not bear other costs, failure within 6 months free maintenance, within 3 months free replacement of faulty parts, due to the failure to comply with the operation specifiCATEEEEions of the damage, without the company's children after reinforcement caused by cracking is not the scope of compensation:
Motor6:The company will provide free maintenance for shell cracking within 12 months, and bear the freight of returning to the factory. The fracture of output shaft is caused by excessive pressure or illegal operation, so it is not within the scope of quality guarantee. Oil leakage occurring more than 3 months is not within the scope of claims, and oil seals must be purchased by themselves.
slewing bearing6:Free replacement for new products within 3 months. Free maintenance within 12 months. Do not add lubriCATEEEEing oil according to the provisions, exceed the oil seal replacement time, regular maintenance is not good, do not comply with the operation specifiCATEEEEions, resulting in rolling body and raceway stuck, broken, are not claims.Worm gear is not within the warranty range, gear ring tooth wear is not within the warranty range.
Diverter6:diverter cracking, spool rod fracture replacement free of charge, oil leakage more than 3 months is not within the scope of compensation, you need to buy oil seal.
Cylinder6: cylinder cracking, cylinder rod fracture free replacement new. Oil leakage more than 3 months is not within the scope of reason, need to buy their own oil seal.
Valve3:There are foreign bodies in the hydraulic oil, longer than the oil seal replacement time, poor regular maintenance, user error. External shock,stuck, strain, after 1 month,are not the scope of claim.
Oil seal3:Foreign body in hydraulic oil, over oil seal replacement time and poor regular maintenance are not within the scope of claim.
Pipeline3:The manufacturer is not responsible for the damage caused by improper maintenance and excessive adjustment of the pressure of the overflow valve caused by external force collision.

About Us

Guangzhou Huilian Machinery Equipment Co., Ltd. is a professional development, production and sales of hydraulic crushers,quick couplers, high frequency vibration crushers, hydraulic shears, hydraulic crushers, stone apples, log grabs and other accessories for construction machinery.
Hydraulic grapple is widely used for handling, loading and unloading materials, sugarcane, wood, stone, steel slag, grabbing ,garbage, scrap metal and other special operations, As one of the leading Excavator attachment manufacturers in China, Huilian has a full range of grapples suitable for all kinds of brands excavators