|
Product Details:
|
| Part Name: | Diaphragm Accumulator | Model: | 81L1-0003 |
|---|---|---|---|
| Material: | Carbon Steel (Stainless Steel) | Volume: | 0.16L/0.32L/0.5L/0.75L/1L/1.4L/2L/2.5L/2.8L |
| Operating Temperature Range: | -20~80°C | AppliCATEion: | Excavator |
| Stock: | In Stock | DIaphragm Material: | NBR |
81L1-0003 31AC-10300 Hydraulic Spare part nitrogen piston accumulator for R130W R140W R170W R180W R200W R210W
| Product name | Diaphragm Accumulator |
| Type | Hydraulic Accumulators |
| Volume | 2.8L |
| Size(cm) | 16X16X26.6 |
| Max Working Pressure | 33Mpa |
Nitrogen Charging Valve Port
Size: M28X1.5This size is used for mostdiaphragm accumulators and alsocan be made to other sizeaccording to every customer's requirement
Fluid Connection Port
Fluid port have many kinds ofthread size such as G, M, UNF,NPT. It can be made accordingto every customer'srequirement.
The Main shell Body
Made with high qualitycarbon steel and is weldedwith professional electronbeam welder. The weld issmooth and flawless
Hydraulic Breaker Spare Parts:
| Hammer Parts | Main Body | Back Head | Charging Valve | Cylinder |
| Socket Plug | Piston | Adapter | Valve | Valve Plug |
| Front Head | Grease Nipple | Rod Pin | Stop Pin | Rubber Plug |
| Ring Bush | Thrust Bush | Upper Bush | Front Cover | Tool Bush |
| Rod Moil Point | Chisel | Washer | Through Bolt | Side Rod |
| Air Check Valve | Valve Adjuster | Accumulator | Accumulator Body | Accumulator Cover |
| Charging V/V | Diaphragm | Seal Kit | O-Ring Seal | Gas Seal |
| Buffer Seal | Dust Seal | U-Packing | Back-up ring | Side Bolt |
| Down Cushion | Tool Set | N2 Gas Charging Set | N2 Gas Cylinder | B-3way valve assy |
| Seal Retainer | Valve Sleeve | Front Head Pin | Lower Bush | Hex Nut |
| Socket Bolt | Step Seal | Upper Cushion | Rubber Pad | Shock Absorber |
Other Related Products
| 31LM-90040 | YUCT-00045 | 31LM-90020 | 31LL-40020 | 31Q5-90500 |
| 31EM-91701 | 31Q6-90370 | 81E3-40050 | 5304161 | 31LC-80010 |
| 31LC-80060 | 31LM-30410 | YUCT-00045 | 31LM-90040 | 31LB-94000 |
| 3037081 | 31L8-90040 | YUCT-00022 | 31LM-90030 | ZGAW-00011 |
| 31LP-40080 | 31LB-93000 | ZGAW-00004 | 34L1-02530 | 1LM-90020 |
| 31LL-40020 | YCAC-01438 | ZTAL-00214 | 31E6-91701 | 32E6-92040 |
| 32E6-92050 | 31Q4-90500 | 31Q8-91670 | ZGAW-00022 | ZGAW-00017 |
Product Usage
Reserve Energy Storage
The accumulator can assist the pump body by adjusting the release of internal hydraulic oil. After the accumulator is equipped,
the specifiCATEEion requirements of the pump can be appropriately reduced to achieve scientific energy conservation and efficiency
Reduce Pulsation Impact
In the fluid circuit, due to the flow of liquid, it will more or less produce pulsating impact on the equipment, and even produce
stronger impact when various valves are closed and the circuit fluid changes sharply. After installing the accumulator, it can be
used as a buffer to effectively reduce pulsation and impact
Maintain Stability
When the external pressure or weight has an impact on the equipment system, the accumulator can well bear the change of external
weight by adjusting its internal gas and liquid balance, so as to avoid severe shaking and fluctuation of the equipment and
maintain the balance and stability of the equipment.
Pressure Volume Compensation
In the pressure circuit, in case of internal leakage or changes in external factors such as pressure and temperature, which
changes the volume of liquid oil in the system and affects the stability of internal pressure of the system, the accumulator can
be used as timely compensation to maintain the stability of the hydraulic system
Contact Person: Ms. KOKO XIAO
Tel: +8613924109994
Fax: 86-20-82193863
