|
Product Details:
|
| Total Weight: | 330 Kgs | Required Oil Flow: | 40-70 L/min |
|---|---|---|---|
| Working Pressure: | 110-140 Kg/cm M2 | Impact Rate: | 500-900 B.P.M |
| Hose Diameter: | 1/2" | Chisel Diameter: | 70mm |
| Applicable Excavator: | 4-7T | ||
| High Light: | excavator rock hammer,hydraulic demolition hammer |
||
Hydraulic Breaker EB68 Excavator Attachment Parts Demolition Hammer Chisel 68mm Jackhammer
| Machine Mode | Weight (Kg) | Hydraulic Oil Flow L/min | Operating Pressure (kg/cm2) | Impact Rate (bpm) | Diameter of Hose (in) | Diameter of Rod (mm) | Suitable Excavator Ton |
| EB45 | 130 | 20-30 | 90-120 | 700-1200 | 1/2 | 45 | 0.8-1.5 |
| EB53 | 200 | 25-50 | 90-120 | 600-1100 | 1/2 | 53 | 2.5-4.5 |
| EB68 | 330 | 40-70 | 110-140 | 500-900 | 1/2 | 70 | 4-7 |
| EB75 | 450 | 50-90 | 120-150 | 400-800 | 1/2 | 75 | 6-9 |
| EB85 | 680 | 60-100 | 130-160 | 400-800 | 3/4 | 85 | 7-14 |
| EB100 | 1000 | 80-110 | 150-170 | 350-700 | 3/4 | 100 | 11-16 |
EB68 Hydraulic Hammer Suitable for Excavator below:
CATEEEE 305 306, PC40 PC45 PC50 PC60, DH55 DH60, Robex55 R60-7, ZX60 ZX60W, SK60, EC55, HD250 HD400, Kubota U50 U55.
Hongkong H&F Eng. Machinery Co.,Limited (Huilian Machinery) Specialized in Hydraulic Breaker/ Hammer Repair Seal Kits and Parts. Seal Kit, Diaphragm and Hyd. Hammer Parts Suitable for Atlas Copco, Alpha, Bretec, BTI, CATEEEE, CP, Daemo DMB Alicon, D&A, Doosan, EDT, Epiroc, Everdigm, Fine, Furukawa, General GB, Hammeroc HR, Hyundai HDB, Indeco HP MES, JCB, Kent, KCB, Komac, Komatsu JTHB, JKHB, Korota, Krupp, Kwanglim, Konan, Montabert, MSB, MTB, Noah, NPK, Okada, OKB, Omal, Poqutec, Powerking, Promove, Rammer, RB Hammer, RBI, Rhino, , Soosan, Stanley, Teisaku, T&H, Toku, Toku, Toyo, UBTECH, EC, etc.
Spare Parts Suitable for Hydraulic Hammers
| Hammer Parts | Main Body | Back Head | Charging Valve | Cylinder | Seal Retainer |
| Socket Plug | Piston | Adapter | Valve | Valve Plug | Valve Sleeve |
| Front Head | Grease Nipple | Rod Pin | Stop Pin | Rubber Plug | Front Head Pin |
| Ring Bush | Thrust Bush | Upper Bush | Front Cover | Tool Bush | Lower Bush |
| Rod Moil Point | Chisel | Washer | Through Bolt | Side Rod | Hex Nut |
| Air Check Valve | Valve Adjuster | Accumulator | Accumulator Body | Accumulator Cover | Socket Bolt |
| Charging V/V | Diaphragm | Seal Kit | O-Ring Seal | Gas Seal | Step Seal |
| Buffer Seal | Dust Seal | U-Packing | Back-up ring | Side Bolt | Upper Cushion |
| Down Cushion | Tool Set | N2 Gas Charging Set | N2 Gas Cylinder | B-3way valve assy |
Hydrauic Breaker Models
| Soosan Hammer Model | SB 10 | SB 20 | SB30 | SB35 | SB40 | SB43 | SB45 | SB50 |
| Hammer Chisel Diameter | 40 | 45 | 53 | 60 | 68 | 75 | 85 | 100 |
| Soosan Hammer Model | SB60 | SB70 | SB81 | SB81A | SB100 | SB120A | SB121 | SB120 |
| Hammer Chisel Diameter | 125 | 135 | 140 | 140 | 150 | 155 | 155 | 155 |
| Soosan Hammer Model | SB130 | SB140 | SB150 | SB151 | MEGA100 | MEGA130 | MEGA170 | MB80 |
| Hammer Chisel Diameter | 165 | 165 | 175 | 175 | 85 | 100 | 125 | F91002 |
| Soosan Hammer Model | C31008 | E91002 | C61006 | D81005 | L21002 | C71002 | C21002 | C31007 |
| Hammer Chisel Diameter | L01004 | D41001 | C11003 | E81002 | F01002 | E71002 | F81002 | C01005 |
Contact Person: KOKO XIAO
Tel: +8613924109994
Fax: 86-20-82193863
